Plain Aluminum Sliding Window

1. Narrow hook design, hook overlap width is only 41mm, smooth lines, compact structure;

2. Non-insulated broken bridge products, suitable for sliding windows and indoor partition doors;

3. Sealed with rubber strips, smooth and silent sliding, good air tightness;

4. This series can be single-track, double-track, and triple-track sliding; the number of sliding fans and the form of grids are diversified;

5. Ultra-low threshold design, barrier-free passage;

6. Two high-quality rubber strips overlap over a large area to improve sealing performance and reduce outdoor noise;

7. Scientific design, high-strength profiles, more opening methods, more stable use experience.

1. Areas with hot summers and cold winters;

2.Hotels, villas, residences, resorts, etc.

1.G tempering: Tempering is a process of strengthening glass. By heating the glass to a point close to the softening point and then rapidly cooling it, a prestressed pressure is formed on the surface of the glass. This treatment process can improve the strength and impact resistance of the glass.

2.LOW-E low-emissivity coating: LOW-E is the abbreviation of low-emissivity coated glass. It is a process of coating one or more layers of metal or metal oxide films on the surface of the glass. These films can reduce the emissivity of the glass, thereby effectively blocking the transmission of thermal radiation while maintaining visible light transmittance. LOW-E glass of different specifications such as single silver, double silver or triple silver can be selected according to needs.

3. Insulating: In glass manufacturing, "A" is usually used to indicate insulating glass, that is, composite glass composed of two or more pieces of glass, which are separated by air or other gases. Insulating glass can effectively isolate heat transfer and sound transmission while maintaining good light transmittance.

4.PVB glass interlayer: PVB is the abbreviation of polyvinyl butyral, which is a transparent plastic material. In glass manufacturing, PVB is used as a sandwich material to bond two or more pieces of glass together to form laminated composite glass. This process can increase the strength and impact resistance of glass.

5. Float (FL): Float is a method of glass manufacturing that uses surface tension to make glass float on the surface of molten metal in a molten state to form flat glass. The glass produced by this method has the characteristics of flat surface, smooth surface, uniform thickness, etc.

6. Homogenization: Homogenization refers to the cold and hot treatment or chemical treatment of glass to eliminate internal stress or unevenness in the glass and improve the stability and durability of the glass.

7. Edge grinding: Edge grinding refers to grinding and polishing the edge of the glass to remove defects such as burrs and sharp angles, and improve the appearance quality and safety of the glass.

8. Hot bending: Hot bending refers to heating the glass to the softening point, bending it into the desired shape, and cooling it to shape it.

Hot Tags: plain aluminum sliding window, China plain aluminum sliding window manufacturers, factory, Outward Opening External Door, Monorail Sliding Door, High Insulation Window, aluminum door plate, Extremely Narrow Sliding Window, Aluminium Curtain Walling